Skip to content
NSW Planning Portal checked every 15 minutes
LodgedLeads

DA vs CDC in NSW: what’s the difference, and why it matters for finding work

NSW has three approval pathways for building work: exempt development, complying development (a CDC) and a development application (DA). How each works, which jobs tend to take which path, and what each one means if you’re a trade business looking for leads.

The LodgedLeads team · · 3 min read

Not every building job in NSW needs a development application. Depending on what is being built and where, a project can take one of three paths: no approval at all, a fast-track approval called a complying development certificate (CDC), or a full development application (DA) assessed by council. If you find work through approvals, knowing the difference tells you where to look, and what you won’t see.

A row of Victorian terrace houses and shopfronts in Paddington, Sydney
Heritage streets like this one in Paddington usually mean a development application: complying development is restricted in heritage conservation areas.

1. Exempt development: no approval needed

Some minor work needs no planning approval at all, as long as it meets the standards in the NSW exempt and complying development codes. Typical examples are small garden sheds, some decks, fences, pergolas and minor internal changes, within strict limits on size, height and distance from boundaries.

Because nothing is lodged, exempt work leaves no public record. You won’t find it in any approval data.

2. Complying development: the fast track (CDC)

Complying development is for work that ticks every box of a pre-set standard, so it doesn’t need a planner’s judgement. If a proposal meets the standards, a complying development certificate can be issued by the council or by a registered private certifier, and it is decided much faster than a DA, often in a few weeks rather than months. Neighbours are notified, but there is no merit assessment to object to.

Many common residential jobs can go this way when the site and design fit the rules: new single houses, alterations and additions, swimming pools, and in many cases granny flats. Whether a particular project can use a CDC depends on the lot: heritage, bushfire or flood constraints, lot size and slope can all rule it out.

3. Development application: the merit assessment (DA)

Anything that doesn’t fit the exempt or complying rules needs a development application, lodged through the NSW Planning Portal and assessed by council on its merits. That includes most larger and more complex projects: multi-unit housing, rebuilds that don’t meet the codes, work on heritage or constrained sites, commercial developments and changes of use, and anything that needs a variation to the planning controls.

DAs take longer, are notified to neighbours who can make submissions, and often come back for more information. Our guide to how long a DA takes in NSW walks through the stages.

The three paths side by side

  • Exempt: no approval and nothing lodged; small, standard work only.
  • Complying (CDC): issued by council or a private certifier; decided quickly against fixed standards; common for straightforward houses, additions and pools on suitable lots.
  • Development application (DA): decided by council on its merits, with public notification; takes longer; needed for larger, complex or non-standard projects, and for sites where complying development isn’t allowed.

What this means if you’re looking for work

For a trade business, the pathway changes both what you can find and when. A DA is public from the day it is lodged and usually sits in assessment for weeks or months before work starts, which gives you time to get in early. A CDC moves fast, so if you chase CDC jobs you need to move fast too. Exempt work never shows up at all, which is why word of mouth still matters.

DA projects also lean towards the bigger, more involved jobs: the knock-down rebuild on a sloping block, the pool in a heritage area, the townhouses, the commercial fit-out. Those are often the jobs that need the most trades and the most careful quoting.

What LodgedLeads covers

To be clear about what you get: LodgedLeads reads the NSW Planning Portal’s development application data. That means development applications, modification applications and reviews of determination lodged through the Portal, from every council that uses it. Complying development certificates aren’t included in our alerts today, and exempt work isn’t recorded anywhere.

Within that, you get every new DA that matches your trades, councils or distance and job size, emailed the evening it is lodged, with an optional second email when it is approved. Browse what is coming through right now on the latest applications page, see your trade on the leads by trade pages, or try LodgedLeads free for 14 days.

This article is general information, not planning advice. Whether a particular project can be exempt or complying development depends on the site and the current codes; the NSW Planning Portal, a certifier or the council can confirm for a given property.

Data source: NSW Planning Portal, NSW Department of Planning, Housing and Infrastructure, under Creative Commons Attribution. About the data.

More from the blog

Hear about the next job in your area first.

Start a free trial