NSW DA trackers: how to look up development applications in any council, and follow them all at once
Every NSW council has its own DA tracker, and each works differently. How to search one by address or application number, what the statuses mean, where to find the plans, and how to watch 127 councils without checking 127 websites.
The LodgedLeads team · · 4 min read
If you want to know what’s being built down the street, or where your next job is coming from, the answer is in a DA tracker. Every council in New South Wales publishes the development applications lodged with it, and most have an online search tool for them, usually called a DA tracker, an application tracker or something like “eTrack” or “Application enquiry”.
They are free, public and genuinely useful. They are also all different, and none of them tells you when something new turns up. This guide covers how to use a council tracker, what you’ll find in it, and how to follow every council at once.
How much is out there
In the 90 days to 6 November 2026, 14,431 applications were lodged across NSW through the NSW Planning Portal: 10,928 new development applications, 3,380 modifications to approved ones and 123 reviews of a council’s decision. That’s about 160 a day, every day, spread across more than 120 councils.
The busiest councils over those three months were:
- Central Coast: 526 applications
- City of Sydney: 463
- Lake Macquarie: 453
- Northern Beaches: 444
- Newcastle: 349
- The Hills Shire and Inner West: 326 each
- Shoalhaven: 324
- MidCoast: 323
- Cessnock: 299
Notice how many of those are outside Sydney. Greater Sydney accounted for 6,266 of the applications; the Hunter, the Central Coast, the Illawarra and South Coast and the rest of regional NSW together lodged more than that.
How to use a council DA tracker
The layout changes from council to council, but the steps are nearly always the same:
- Find the tracker. Search for your council’s name with “DA tracker”, or look on the council website under Planning or Development. The page usually has a search form and a list of recently lodged or exhibited applications.
- Search by address or by number. You can normally search by street address, suburb, application number or date range. The council’s own number (something like DA2026/0412) is the most reliable; addresses work if you get the format right.
- Open the application. You’ll see the description of the work, the status, key dates, sometimes the estimated cost, and a list of documents.
- Read the documents. Plans, the statement of environmental effects and the BASIX certificate are often published, especially while an application is on exhibition. They show the size of the job and exactly what’s proposed.
Most trackers also let you list everything lodged in a date range. That is the closest a council tracker gets to a feed of new work, and you have to remember to go and look.
What the statuses mean
- Lodged or Submitted. The application has just gone in. The project is at its earliest, and the trades usually haven’t been chosen.
- On exhibition or Notified. Neighbours can comment, and the documents are usually public. A good time to read the plans.
- Under assessment. A council planner is working through it.
- Additional information requested. Council has asked for more detail or changes. Common, and not a bad sign.
- Determined. A decision has been made, almost always an approval with conditions. Construction is getting close.
- Withdrawn or Rejected. The application has stopped, though owners often redesign and lodge again.
Across NSW right now, of the applications lodged in the last 90 days, 43% are already determined, 39% are under assessment and 15% are waiting on more information. For more on how long each stage takes, see how long a DA takes in NSW.
Where council trackers fall short
Council trackers are built so residents can check one application. They are much less useful if you want to find work:
- One council at a time. A trade business working across three or four council areas has three or four different websites to check, each with its own search form.
- No alerts. Nothing tells you a new pool, granny flat or knockdown rebuild has been lodged. You find it only if you go looking on the right day.
- No filtering by trade. You can’t ask a tracker for “new dwellings with a pool” or “anything with demolition”. You scroll and read.
- Different words for the same thing. One council says “secondary dwelling”, another says “granny flat”, another just “alterations and additions”.
Following every council at once
Behind the council trackers, applications lodged online go through the NSW Planning Portal, and the NSW Government publishes them as open data. LodgedLeads reads that data every 15 minutes, sorts each application by the work it involves, and keeps a page for every council, for example Inner West, Lane Cove, Canada Bay, Waverley, Mosman, Port Stephens, Hawkesbury and Dubbo. The full list is on the councils page, and you can also browse by suburb.
Members pick their trades and areas once. From then on, each new application that matches arrives by email the evening it is lodged, with a link straight to the council’s own tracker so you can read the plans. You can also ask to hear again when one is approved.
A council tracker answers “what’s happening at this address?”. A trade business needs to know “what’s new in my area, for my trade, today?”.
See what’s been lodged in the last few days on the latest applications page, or start a 14-day free trial. No card is needed.
Figures are from NSW Planning Portal data for applications lodged online between 8 August and 6 November 2026. Some councils also accept applications outside the Portal, and some work is approved as complying development instead; read DA vs CDC for what that means.
Data source: NSW Planning Portal, NSW Department of Planning, Housing and Infrastructure, under Creative Commons Attribution. About the data.